New! ... Pneumatic Tubing, Air Fittings & Flow Control Valves 
 |
NITRA™ Polyurethane (PUR) Pneumatic Tubing
is made from the highest quality, 100% virgin raw materials available and has a hardness specification of Shore A 98. It is ether-based to provide excellent hydrolysis, oil and cold resistance. NITRA ether polyurethane tubing is strong, flexible, and offers superior kink resistance compared to other flexible pneumatic hoses. With its extremely tight outside diameter tolerance, NITRA polyurethane tubing is ideal for use with NITRA push-to-connect air fittings. These flexible pneumatic hoses are available in inches or metric pneumatic tubing sizes. |
|
NITRA™ Pneumatic High Pressure Nylon Tubing
is made from the highest quality, 100% virgin raw materials available and has a hardness specification of Shore D 70. Nylon tubing is recognized as an industry standard for applications which require higher working pressures and superior heat/chemical resistance than polyurethane. NITRA Nylon 12 tubing is strong, lightweight, and has a very low moisture absorption rate so it will remain flexible with a longer service life than other nylons. NITRA Nylon 12 is ideal for use with NITRA push fittings. These flexible pneumatic hoses are available in inches or metric pneumatic tubing sizes. |
|
NITRA™ Air Pneumatic Push-to-Connect Fittings
are made of a strong thermoplastic (PBT) and have stainless steel tube gripping claws. Threaded components are made of nickel-plated brass and have pre-applied Teflon thread sealant. The bodies of union elbow and union tee fittings with threaded connections can be rotated after installation to allow for variations in piping direction. NITRA Polyurethane and Nylon 12 tubing is easily connected by simply inserting the tubing end into the pneumatic fitting. To release the pneumatic tubing, press the air fitting's circular release ring and the tubing can be easily pulled out. A variety of union fittings and bulkhead fittings are available. A variety of other pneumatic fitting styles are also available, such as: plugs, plug reducers, male/female straight, male/female elbow, branch tees and more. Air fitting bodies are composed of either nickel-plated brass or thermoplastic with stainless steel tube gripping claws. |
|
NITRA™ Pneumatic Push-to-Connect Flow Control Valves (Speed Controllers)
provide accurate airflow regulation for precise motion control of pneumatic cylinders. NITRA flow control valve bodies are made of a strong thermoplastic (PBT) and have stainless steel tube gripping claws. Threaded components are made of nickel-plated brass and have pre-applied Teflon thread sealant. Elbow flow control valves can be rotated after installation to allow for variations in piping direction. NITRA Polyurethane and Nylon 12 tubing is easily connected by simply inserting the tubing end into the air fitting. To release the pneumatic tubing, press the air fitting's circular release ring and the tubing can be easily pulled out. |
|
